Common Electrical Problems Around the Home

surge protector

When it comes to electrical problems, they should never be dismissed. A lot of people just ignore the problem and think of it as a glitch. But that should never be the case. These problems can accelerate into something bigger if not dealt with immediately. When dealing with electrical problems you should always air on the side of caution.

Here are a few common electrical problems that homeowners face:

1. Dimmed or Flickering Lights

Dimmed or flickering lights are often an indication of an overloaded circuit. If not dealt with immediately, it can cause arcing or even fire. If the lights in your house are frequently flickering, call a professional electrician right away.

2. Electrical Surges

There are a few reasons behind the constant electrical surges in your house, like faulty appliances, faulty or poor wiring, damaged power lines, or lightning strikes. These frequent surges are abnormal and should be dealt with immediately.

3. Electrical Shocks

Electrical shocks are very unpleasant, and we hope that you never have to experience one. If you are living in an old house, you might face this problem more frequently. There are a couple of reasons behind these electrical shocks – from a problem with a circuit to a problem with an appliance. If you experience an electrical shock again, seek help from an electrician.

4. Frequently Burnt Out Light Bulbs

Maybe the bulb you bought was of bad quality or maybe you overused it. The reason behind frequently burnt-out reason could be connected to a loose socket or circuit. Get someone to come in and look it over. It is always better to be safe than sorry.

5. Overloading the Circuit

Do you use an extension cord to connect everything on the same circuit so you don’t have to get up from your bed? Wrong move! What you don’t know is that overloading a circuit can generate heat, which can result in fire. Even if you close the circuit, there is still a chance of it getting melted.

6. Power Sags and Dips

If you use a faulty electrical plug to plug in your appliances, the power around your house will dip. That may give a horror movie touch, but trust us, that is very bad and not at all exciting. This is one of the most common problems faced by people. One of the reasons behind it could be that the plug is of bad quality.

Any appliance you connect to a bad grip could get damaged, so make sure you get it inspected.

Categories: 
Related Posts
  • Should You Install USB Outlets in Your Home Read More
  • How Often Should You Do a Home Electrical Safety Inspection? Read More
  • Aluminum vs Copper Conductors: Pros and Cons of Both Read More
/